National Masonry’s Designer Range features the leading collection of decorative masonry Designer Blocks and our elegant Aspect Brick Range.
In Victoria, Designer Blocks are available in 5 contemporary colours in either a Smooth Face, Honed, Shot-blast or Polished finish and 6 colours in our Split Face finish.
Our Aspect Honed Bricks are available in 5 beautiful colours with a Honed smooth-to-the-touch, exposed aggregate, matt texture that opens up a world of design possibilities. Whether large or small, National Masonry’s range of decorative blocks and bricks will give your next project the winning edge.
Value Added Finishes
Value added finished masonry is supplied as a single face product. When only one face is value added, the back side of the block may not be suitable as a face finish due to the value adding process. If both faces are value added, both faces will be suitable for a face work but care will be required when laying as there may be 2-5mm difference in the width of the individual blocks due to the honing / polishing process.
Lead Time
Lead times apply to all coloured blocks and bricks. Longer lead times apply to Honed, Polished, and Shot-Blast Finishes as the product must be cured to harden sufficiently before processing.
Colour and Texture Variation
Some variation in colour may occur due to natural variations in raw materials. Colour variation can also occur from batch to batch making it essential to order all product requirements at the same time. National Masonry® recommends part size blocks are cut on site to maintain colour consistency. Blocks can be cut to order.
Blending
To obtain a consistent finish and mitigate colour variation, National Masonry® strongly recommends “blending” which is drawing product from multiple pallets on-site.
Blocks & Bricks Storage
Blocks must be kept dry on site before use and when laid. Freshly laid walls must be covered overnight and when rain interrupts work in order to prevent moisture entering the cores of the blocks. Failing to do this will increase the likelihood of efflorescence.
Mortar
Coloured Designer Range blocks and bricks contain an efflorescence inhibitor (Tech-Dry®). To complete the system, an additive must be used in mortar mix. National Masonry® supply and recommend TECH-DRYAD Mortar Additive. The consumption of additive varies significantly, 20 litres of mortar additive may lay approximately 1000-1500 Tech Dry Blocks.
Sealing
All Designer Range blocks and bricks should be cleaned and sealed with a quality penetrating sealer after installation. Failure to do so dramatically increases the likelihood and severity of efflorescence and general staining.
Using a bespoke combination of fine sands, aggregates, and Bayferrox® Pigments, National Masonry® create a solid fine textured masonry block with crisp sharp lines and rich colours. The use of natural raw materials gives the product its own character which cannot be matched by other more artificially processed building materials.
Available in 5 unique and contemporary colours
The Split Face block recreates a traditional masonry rock face finish with its bold textures and exposed aggregate finish. Crafted from a single master block, the splitting process uses a diamond tip bolster to split the block to reveal a striking rock face finish.
Available in 6 unique and contemporary colours
Using a bespoke combination of fine sands, aggregates, and Bayferrox® Pigments, National Masonry® first create a solid fine textured masonry block with crisp sharp lines and rich colours. The polishing process begins by grinding the surface layer off the block revealing the fine sands and aggregates in a matte finish. Using a diamond head, the face is then mechanically polished to provide a glass like finish.
Available in 5 unique and contemporary colours
With the Honing process, 2-3mm from the surface is removed by grinding. Either used individually, or combined with other surface textures, this will assist in the visual appeal of contemporary designs whether commercial or residential.
Available in 5 unique and contemporary colours
With the Honing process, 2-3mm from the surface is removed by grinding. Either used individually, or combined with other surface textures, this will assist in the visual appeal of contemporary designs whether commercial or residential.
Available in 5 unique and contemporary colours
| Image | Product Code | Product Name | Dimensions | Weight per unit (kg) | Units per m2 | Units per pallet | Available Finishes | Available Colours |
|---|---|---|---|---|---|---|---|---|
 | 10.01 | Standard | 390x190x90 | 12 | 12.5 | 149 | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
 | 10.71 | Standard Half Height | 390x90x90 | 5.6 | 25 | 300 | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
 | 10.117SM | Quarter Height | 390x40x90 | 3.5 | 50 | 432 | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
 | 10.26SM | Corner Return Solid | 390x190x90/190 | 17.8 | 96 | Smooth Face Only | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper | |
 | 10.39 | Double Sill | 190x90x110 (after splitting) | 7.9 per double unit | 220 double units | Smooth Face Only | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper | |
 | 15.20 | Universal Hollow (inc 1 in 4 with closed ends) | 390x190x140 | 12.5 | 12.5 | 120 (Smooth) or 108 (Honed or Polished) | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
 | 50.31 | Capping Tile | 390x190x40 | 6.9 | 2.5/lin m | 216 | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
 | 20.20 | Universal Hollow (inc 1 in 3 with closed ends) | 390x190x190 | 15.5 | 12.5 | 90 | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
 | 30.01 | Standard | 390x190x290 | 20.5 | 12.5 | 72 | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
 | 30.48 | Standard | 390x290x190 | 19.6 | 12.5 | 60 | Smooth Face, Honed Face, Polished Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Jasper |
| Image | Product Code | Product Name | Dimensions | Weight per unit (kg) | Units per pallet | Available Finishes | Available Colours |
|---|---|---|---|---|---|---|---|
 | 10.101 | Standard | 390x95x190 (1 in 6 universal - bolster 1/2 or 3/4 onsite) | 14.0 | 108 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
 | 10.26SP | Split Corner | 390x190x90/190 | 22 | 80 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
 | 10.109 | Half Height | 390x90x90 | 7.3 | 216 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
 | 10.117 | Quarter Height | 390x40x90 | 3.5 | 432 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
 | 15.101 | Standard | 390x190x140 | 15.5 | 120 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
 | 20.101 | Standard | 390x190x190 | 20.7 | 90 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
 | 20.142 | Full Length Channel | 390x190x190 | 17.0 | 90 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
 | 20.192 | Split Corner | 390x190x190 | 21.9 | 72 | Split Face | Alabaster, Sandune, Almond, Charcoal, Pearl Grey, Sandstone Blend |
All our Concrete Pavers and accessories can be picked up or we can deliver to the following areas:
Victoria
Melbourne, Geelong, Mornington Peninsula, Bellarine Peninsula, Ballarat, Bendigo.
Don’t see your location here? Contact us to find a reseller near you.
